SDS Plus Core Bit, 1 1/8 in

Product Description SDS Plus Core Bit, Size (In.) 1 1/8Drilling Length (In.) 3-13/16Application Masonry and Concrete Drilling, For Use With 45L424, 45L225, G5114085 From the Manufacturer Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thin Wall construction is ideal for smaller hammers and newer concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus drive Shank must be used to drive the Core Bit. Use of Center Pin and Guide Plate is not recommended for positioning and starting a 1-1/8 inch hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured/seasoned concrete or use with larger hammers.

• Manufacturer: Milwaukee
• Country of manufacture: Japan
• Power Cutting & Sawing
• 1-1/8 in. diameter
• Usable cutting depth 3 in.
• Thin wall
• Use with SDS core bit shank 48-03-3545 (8 in.) or 48-03-3551 (12 in.)